We have decided to phase out the Mixed Reality Forums over the next few months in favor of other ways to connect with us.
The first way we want to connect with you is our mixed reality developer program, which you can sign up for at https://aka.ms/IWantMR.
The plan between now and the beginning of May is to clean up old, unanswered questions that are no longer relevant. The forums will remain open and usable.
On May 1st we will be locking the forums to new posts and replies. They will remain available for another three months for the purposes of searching them, and then they will be closed altogether on August 1st.
So, where does that leave our awesome community to ask questions? Well, there are a few places we want to engage with you. For technical questions, please use Stack Overflow, and tag your questions using either hololens or windows-mixed-reality. If you want to join in discussions, please do so in the HoloDevelopers Slack, which you can join by going to https://aka.ms/holodevelopers. And always feel free to hit us up on Twitter @MxdRealityDev.
Right thumb stick appears in wrong position
Just received a new set of motion controllers.
After pairing them and watching the pc update their firmware the first thing I encounter is that the Right motion controller isn't responding correctly.
Upon closer inspection when I look at the representation of the right controller through the headset I see the right thumb stick appears jammed backwards. However the actual physical thumb stick is centered as you would expect when at rest. The thumbstick when I move it feels fine and resists and springs back as expected.
If I move the thumbstick left or right the vr representation does seem to move left and right but the forward and back movement does not change the vr position from its jammed to the back location.
When the right controller is turned on, I am unable to teleport or do much of anything else, turning off the right controller does empower the left controller to be used for teleportation and other functionality.
Is this a known software issue or did I receive some bad hardware?