The Mixed Reality Forums here are no longer being used or maintained.
There are a few other places we would like to direct you to for support, both from Microsoft and from the community.
The first way we want to connect with you is our mixed reality developer program, which you can sign up for at https://aka.ms/IWantMR.
For technical questions, please use Stack Overflow, and tag your questions using either hololens or windows-mixed-reality.
If you want to join in discussions, please do so in the HoloDevelopers Slack, which you can join by going to https://aka.ms/holodevelopers, or in our Microsoft Tech Communities forums at https://techcommunity.microsoft.com/t5/mixed-reality/ct-p/MicrosoftMixedReality.
And always feel free to hit us up on Twitter @MxdRealityDev.
Worked before upgrading windows 10...
Fails to deploy after successful build with following error:DEP6957 : Failed to connect to device '192.168.1.114' (device local ip) using Universal Authentication. Please verify the correct remote authentication mode is specified in the project debug settings. 0x8007274C: The network event being waited on triggered an error.
I had my dev environment setup perfectly on windows 8.1 for the past 3 weeks, didn't have any problems deploying to the device over USB. Now after upgrading I cannot deploy to the hololens, but builds are successful.
After wiping the hard drive, installing windows 10 fresh, intall VS with update 2, install win 10 development packages in VS, install the latest beta unity 5.4.0b16-HTP (8b4340e08ab1), install UWP Runtime, setup Unity settings based on the getting started info, and how it was before upgrading, it fails to deploy to the hololens. It compiles successfully.
I tried Debug and Release, x86, Device, and when plugged in via USB it says failed to
I set it to Holographic in the app manifest:
I tried:
-Reset Hololens to factory default
-Enable Developer mode on hololens and laptop
-Pair to my laptop
-Setup remote connection to my hololens IP, both computer and hololens are on same network.
-I uninstalled the win 10 software dev kits and re-installed per one thread I read.
-I tried deploying in debug mode as per another thread I read.
In "Programs and Features" the win 10 software dev kits installed are:
Windows Software Development Kit - Windows 10.0.10586.212
Windows Software Development Kit - Windows 10.0.26624
The error in VS is attached.
Best Answer
-
Options
So I reinstalled windows 10 and everything a second time and it works perfectly. Installed Unity/UWP/VS from the same installers that weren't working on my fresh install of win10 yesterday.
It seems like the only difference between yesterday and today was I'd paired the hololens to the computer outside of VS, and VS then never asked for a pin.....and it wouldn't deploy to device despite being paired.
After re-installing windows, VS asked for the pin and I entered it and everything worked.
So I believe pairing through VS does something more than simply pairing? And is definitely required.
5
Answers
So I reinstalled windows 10 and everything a second time and it works perfectly. Installed Unity/UWP/VS from the same installers that weren't working on my fresh install of win10 yesterday.
It seems like the only difference between yesterday and today was I'd paired the hololens to the computer outside of VS, and VS then never asked for a pin.....and it wouldn't deploy to device despite being paired.
After re-installing windows, VS asked for the pin and I entered it and everything worked.
So I believe pairing through VS does something more than simply pairing? And is definitely required.
@LeefromSeattle, You are correct, you must pair in Visual Studio.
Thanks!
David
I am also getting the same issue, Can we get pairing UI without reinstalling window?
Hi @LeefromSeattle : Can you please share the devlopment computer specs with me ? Many thanks in advance, im looking for a suitable comp to start development