Hello everyone.

We have decided to phase out the Mixed Reality Forums over the next few months in favor of other ways to connect with us.

The first way we want to connect with you is our mixed reality developer program, which you can sign up for at https://aka.ms/IWantMR.

The plan between now and the beginning of May is to clean up old, unanswered questions that are no longer relevant. The forums will remain open and usable.

On May 1st we will be locking the forums to new posts and replies. They will remain available for another three months for the purposes of searching them, and then they will be closed altogether on August 1st.

So, where does that leave our awesome community to ask questions? Well, there are a few places we want to engage with you. For technical questions, please use Stack Overflow, and tag your questions using either hololens or windows-mixed-reality. If you want to join in discussions, please do so in the HoloDevelopers Slack, which you can join by going to https://aka.ms/holodevelopers. And always feel free to hit us up on Twitter @MxdRealityDev.

Mixed Reality USB 3 PROBLEM!!!

I've been having this error

"Make sure the USB cable is plugged into the SuperSpeed USB 3.0 port. If you need more help, this error"

I've checked the other forums, so many people having exactly the similar problem.

Answers

  • Jimbohalo10Jimbohalo10 ✭✭✭
    edited June 11

    @fliim said:
    I've been having this error

    "Make sure the USB cable is plugged into the SuperSpeed USB 3.0 port. If you need more help, this error"

    I've checked the other forums, so many people having exactly the similar problem.

    See WikiPedia article
    Part Quote

    Various early USB 3.0 implementations widely used the NEC/Renesas µD72020x family of host controllers, which are known to require a firmware update to function properly with some devices.

    Further on in article quote

    These firmware updates resolve the following issues related to the USB 3.0 ports on these boards: • **

    BIOS and operating system do not detect devices attached to the USB 3.0 ports. •

    **
    System hangs on POST code 58 for one minute if any device is attached to USB 3.0 ports, and then continues the boot process. • In Device Manager, the Renesas* USB 3.0 eXtensible Host Controller is shown with a yellow bang and the error message "Windows has stopped this device because it has reported problems. Code 43"

Sign In or Register to comment.